N2100 Stock Redboot Configuration

From Thecus Wiki

This page documents the manufacturers configuration of redboot. The information here is based on the foonas.org n2100 platform notes. Note that your MAC address values will be different.

Default FIS Config

Name              FLASH addr  Mem addr    Length      Entry point
RedBoot           0xF0000000  0xF0000000  0x00040000  0x00000000
RedBoot config    0xF0FC0000  0xF0FC0000  0x00001000  0x00000000
FIS directory     0xF0FE0000  0xF0FE0000  0x00020000  0x00000000
ramdisk           0xF0040000  0x00800000  0x00D00000  0x00800000
kernel            0xF0D40000  0x00200000  0x00160000  0x00200000
user              0xF0EA0000  0x00120000  0x00120000  0x00800000

Default fconfig Config

.. thecus_setip
.. fis load ramdisk
.. fis load kernel
.. exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=128M@0xa0000000"

Boot script timeout (1000ms resolution): 3
Use BOOTP for network configuration: false
Gateway IP address: 0.0.0.0
Local IP address: 192.168.1.100
Local IP address mask: 255.255.255.0
Default server IP address: 0.0.0.0
Console baud rate: 115200
DNS server IP address: 0.0.0.0
GDB connection port: 9000
HW Status: 0
Force console for special debug messages: false
MAC address: 0x00:0x14:0xFD:0x10:0x4E:0x12
MAC address 2: 0x00:0x14:0xFD:0x10:0x4E:0x13
Network debug at boot time: false
Reset default: Normal
Serial number: N2100 V2.1.00